| Business Class Indoor |
 |
|
| EAP-3660 |
Wireless Access Point/Repeater/WDS |
| |
| Description |
EAP-3660 is a small form factor wireless product. It is stylish and looks like a smoke detector on the ceiling. It has embedded high gain antenna and you won’t see antenna exposed on your building environment.
This is Wireless High Power and High Gain Access Point / Repeater/ WDS operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b/g (2.4GHz) standard. It supports high output power levels setting and diversity function can has the best transmit and receive signal for traffic communication.
To protect your wireless connectivity, it can encrypt all wireless transmissions through WEP data encryption and supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. User isolation function can protect the private network between client users. Thus, EAP-3660 has mighty security function for your network safety.
|
| |
| |
| |
 |
|
| ECB-3500 |
Wireless Long Range Multi-function 7+1 AP |
| |
| Description |
ECB3500 is a powerful, enhanced, enterprise level product supports 7 multi-functions to operate for every kind of working environment.
It supports high transmit output power and high data rate which plays different roles of Access Point/ Client Bridge / Repeater / WDS AP / WDS Bridge / Client Router / AP Router. It operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and super high speed of 802.11g (2.4GHz, 108Mbps) wireless standards. It supports different output power level settings, bandwidth selection, and RSSI indicator which enables the best transmitting and receiving signal for traffic communication |
| |
| |
| |
 |
|
| ECB-9500 |
11N Multi-Function Gigabit Client Bridge |
| |
| Description |
ECB9500 is a powerful and multi-functioned 11n product with 7 major multi-functions, is designed to operate in every working environment for enterprises. ECB9500 is a Wireless Network device that delivers up to 6x faster speeds and 7x extended coverage than 802.11g devices. ECB9500 supports home network with superior throughput, performance and unparalleled wireless range. With user-friendly WPS function, it helps users to connect to wireless device simply with a one-push button
To protect data during wireless transmissions, ECB9500 encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. ECB9500 also supports IEEE 802.1x Supplicant function in CB mode. Its MAC address filter allows users to select stations with access to connect network. In addition, the function of user isolation protects private network between client users. ECB9500 thus is the best product to ensure network safety for enterprises |
| |
| |
|
| |
 |
|
| EAP-9550 |
11N Wireless Access Point/Repeater/WDS |
| |
| Description |
EAP9550 is a powerful and multi-functioned 11n Access Point and it can act three modes AP/WDS/Universal Repeater. Smoke detector appearance will minimize visibility. So this model can work properly at Hotel or public area. EAP9550 is a Wireless Network device that delivers up to 6x faster speeds and 7x extended coverage than 802.11g devices. Product’s RF performance is finely tuned so it will bring best wireless signal for each client. EAP9550 supports home network with superior throughput, performance and unparalleled wireless range. To protect data during wireless transmissions, EAP9550 encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. Its MAC address filter allows users to select stations with access to connect network. EAP9550 thus is the best product to ensure network quality for hotspots.
|
| |
| |
|
| |
 |
|
| ECB7510 |
Wireless Gigabit Dual Band Concurrent Router AP |
| |
| Description |
- Two radio support, radio 1: 802.11b/g/n, radio 2: 802a/n
- Dual Concurrent N allows simultaneous operation of 2.4GHz and - - - 5GHz wireless network
- Support 802.3af/at
- Access Point/Client Bridge/Repeater/WDS (AP & Station)
- VPN Pass-Through (PPTP, L2TP, IPSEC)
- MSSID/VLAN, Bandwidth Management, Auto/Best Channel Selection
- WEP/WPA/WPA2, 802.1x Authenicator
- 2.4G/5G (3dBi/5dBi) Dual Band Antenna |
| |
| |
| |
 |
|
| M36 |
Indoor Wireless MESH AP |
| |
| Description |
Intgrate diversity 5dBi Antenna
Access Point/ WDS/ Repeater
Antenna Diversity Support
Wall Mount and Ceiling Mount
LED on/ off Control
MESH & NMS Support
MSSID, 802.3af, SNMP, Bandwidth Management |
| |
| |
| |
| SOHO Router |
 |
|
| ESR-9850 |
802.11b/g/n SOHO Router |
| |
| Description |
ESR9850 is a 2T2R Wireless 11N Gigabit Router that delivers up to 6x faster speeds and 3x extended coverage than 802.11g devices. ESR9850 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.
There's also a built-in 4-port full-duplex 10/100/1000/1000 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection. |
| |
| |
| |
 |
|
| ESR-9753 |
802.11b/g/n SOHO Router |
| |
| Description |
ESR-9753 is a 1T1R Wireless Single chip 11N Broadband Router that delivers up to 3x faster speeds than 802.11g devices. ESR-9753 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.
There's also a built-in 4-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection. |
| |
| |
| |
 |
|
| ESR-9752 |
802.11b/g/n SOHO Router |
| |
| Description |
ESR-9752 is a 2T2R Wireless Single chip 11N Broadband Router that delivers up to 6x faster speeds and 3x extended coverage than 802.11g devices. ESR-9752 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.
There's also a built-in 4-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection. |
| |
| |
| |
|
|
 |
|
| ESR-6670 |
3G Mobile Wireless-N Router (300Mbps) |
| |
| Description |
ESR6670 is a 3G-enabled 2T2R Wireless-N Router that delivers up to 6x faster speed (300Mbps) and 3x extended coverage than 802.11g devices. With Extreme Session Support (19000 Sessions) users are able to experience the unprecedented performance and smooth network services. This product supports 3G data cards from HuaWei, OPTION, Sierra, BandLuxe and SIMCOM with standards covering WCDMA (HSDPA), CDMA2000 & TD-SCDMA. It is built-in with USB for easy and flexible plug-and-play interface for 3G cards.
ESR6670 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button. There's also a built-in 2-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devicestogether. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection. |
| |
| |
| |
 |
|
| ESR-6650 |
3G Mobile Wireless Mobile Router (150Mbps) |
| |
| Description |
ESR6650 is a 3G-enabled Wireless-N Router that delivers up to 3X faster speed (150Mbps). It supports 3G data cards from HuaWei, OPTION, Sierra and BandLuxe with standards covering WCDMA (HSDPA), CDMA2000 & TD-SCDMA. It is built-in with USB for easy and flexible plug-and-play interface for 3G cards. ESR6650 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.
There's also a built-in 2-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection. |
| |
| |
| Business Class Outdoor |
 |
|
| NS2 |
Networks NanoStation2 802.11bg 2.4GHz |
| Description |
The Ubiquiti NanoStation2 can be re-flashed with Open-Mesh (ROBIN) firmware. This outdoor router can be used in conjunction with our Professional Mesh mini-routers to provide robust WiFi coverage.
You can use our free hosted dashboard to control and monitor your networks at dashboard.open-mesh.com. With it, you can set the network SSID, control how much bandwidth users get, design and build a splash page, send users to an external "redirect URL" on login, and much more. |
| |
| NS5 |
Networks NanoStation5 802.11a 5GHz |
| Description |
NanoStation 5, the Ultimate 5GHz CPE for the Global WISP Community. Featuring Adaptive Antenna Polarity (AAP) Technology.
The device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts. But, don't be fooled; it is as powerful as it is simple. Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks. |
| |
| |
| |
 |
|
| NS 2L |
LOCO2 Outdoor 8DBI Dual-Polarization 802.11b/g |
| Description |
UBIQUITI NANOSTATION LOCO2 WIRELESS CPE OUTDOOR 8DBI DUAL-POL 802.11b/g
NanoStation Loco provides a breakthrough in cost, reliability, & performance. Features up to 10km of range performance, 25+Mbps of throughput performance, & the powerful, intuitive AirOS by Ubiquiti. NanoStation Loco is the latest innovation in broadband wireless CPE technology from Ubiquiti.
| Features Include: |
| Processor Specs: Atheros MIPS 4 KC, 180MHz |
| Memory Information: 16MB SDRAM, 4MB Flash |
| Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface |
| Approvals: FCC Part 15.247, IC RS210, CE |
| RoHS Compliance: YES |
| Mounting Kit: Pole Mounting Kit included |
| Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return) |
|
| |
| NS L5 |
LOCO5 WIRELESS CPE OUTDOOR DUAL-POL 802.11a |
| Description |
UBIQUITI NANOSTATION LOCO5 WIRELESS CPE OUTDOOR 13DBI DUAL-POL 802.11a
NanoStation Loco provides a breakthrough in cost, reliability, & performance. Features up to 10km of range performance, 25+Mbps of throughput performance, & the powerful, intuitive AirOS by Ubiquiti. NanoStation Loco is the latest innovation in broadband wireless CPE technology from Ubiquiti.
| Features Include: |
| Processor Specs: Atheros MIPS 4 KC, 180MHz |
| Memory Information: 16MB SDRAM, 4MB Flash |
| Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface |
| Approvals: FCC Part 15.247, IC RS210, CE |
| RoHS Compliance: YES |
| Mounting Kit: Pole Mounting Kit included |
| Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return) |
|
| |
| |
| |
 |
|
| NSM2 |
Networks NanoStation M2 2.4GHz |
| Description |
150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.
With optimized cross-polarity isolation and in a compact form-factor.
The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration. |
| |
| NSM5 |
Networks NanoStation M5 5GHz |
| Description |
150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before
New antenna array designs featuring 16dBi dual-polarity gain at 5GHz. Both with optimized cross-polarity isolation and in a compact form-factor
The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration. |
| |
| |
|
| |
 |
|
| PS2-17D |
PowerStation2 17dbi Dual Polarity Antenna 802.11bg |
| Description |
PowerStation is a versatile open architecture 802.11 based outdoor wireless platform that can be used as an AP, Bridge, PMP Station, Mesh networking client, and in many more applications being developed. It features exceptional radio and antenna design which allows links to be established over distances of 50km and can provide significantly increased throughput (up to 50+Mbps TCP/IP) over other solutions in comparable environments. Additionally, Ubiquiti has made public Linux SDK and toolchain resources for developers. |
| |
| |
|
| |
 |
|
| PS2-EXT |
PS2-EXT POWERSTATION2 2.4GHz 802.11bg |
| PS5-EXT |
PowerStation5 PS5-EXT 802.11a |
| Description |
PowerStation is a versatile open architecture 802.11 based outdoor wireless platform that can be used as an AP, Bridge, PMP Station, Mesh networking client, and in many more applications being developed. It features exceptional radio and antenna design which allows links to be established over distances of 50km and can provide significantly increased throughput (up to 50+Mbps TCP/IP) over other solutions in comparable environments. Additionally, Ubiquiti has made public Linux SDK and toolchain resources for developers. |
| |
| |
| |
 |
|
| ROCKETM2 |
2.4GHz Hi Power 2x2 MIMO AirMax TDMA BaseStation |
| ROCKETM5 |
5GHz Hi Power 2x2 MIMO AirMax TDMA BaseStation |
| Description |
True Carrier Class Network Performance.
The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP Airmax base-station applications. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas |
| |
| |
| |
 |
|
| BULLET-M2-HP |
Outdoor 802.11n 802.11g |
| BULLET-M5-HP |
Outdoor 802.11n 802.11a |
| Description |
| 100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links |
| No radio card / host board issues |
| No RF cable quality concerns |
| No mechanical stability concerns |
| No enclosure mounting requirements |
Just Plug and Go.
|
| Features Include: |
| Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz |
| Memory Information: 32MB SDRAM, 8MB Flash |
| Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface |
| Approvals: FCC Part 15.247, IC RS210, CE |
| RoHS Compliance: YES |
| RF Connector: Integrated N-type Male Jack (connects directly to antenna) |
| Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return) |
Bullet does not include a PoE injector or power supply. Recommended DC voltage range is 10V to 24V. |
|
| |
| |
| |
 |
|
| EOC-8610 PLUS |
Outdoor Access Point / Multi-Client Bridge / WDS |
| |
| Description |
This is a dual-band High Power and High Gain Access Point/Client Bridge that operates seamlessly in the 2.4 GHz/5 GHz frequency spectrum and the newer, faster 802.11a (5GHz, 54Mbps) and 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you will experience the best wireless connectivity available today. |
| |
| |
| |
 |
|
| EOC-5610 |
Wireless 802.11 a/b/g Outdoor AP |
| |
| Description |
EOC-5610 is a long range outdoor wireless Access Point / Client Bridge that operates in both 5GHz and 2.4GHz frequency. It provides high bandwidth up to 54Mbps and features high transmitted output power as well as superior sensitivity. EOC-5610 extends radio coverage, avoids unnecessary roaming between Access Points and ensures a stable wireless connection while reduces the number of required equipments.
EOC-5610 provides user friendly interface including user friendly distance control ranges from 1KM up to 30KM and RSSI LED indicator offering real time signal status. It comes with PoE injector for convenient outdoor installation.
EOC-5610 enforces transmission security with full support of latest encryption mechanism including 64/128-bit WEP, WPA and WPA2. With 13dBi internal antenna and superior performance, EOC-5610 makes an optimal wireless solution for both small and large scale projects |
| |
| |
| |
 |
|
| EOC-8610S PLUS |
Outdoor Access Point / Multi-Client Bridge / WDS |
| |
| Description |
This is a dual-radio High Power and High Gain Access Point/Client Bridge that operates seamlessly in the 2.4 GHz/5 GHz frequency spectrum and the newer, faster 802.11a (5GHz, 54Mbps) and 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you will experience the best wireless connectivity available today. |
| |
| |
| |
 |
|
| EOR-7550 |
Dual Radio Multi-Function Repeater |
| |
| Description |
EOR7550 equips with two powerful independent RF interfaces which support 802.11a/b/g and 802.11b/g/n. With certified IP-65 protection, it is designed to deliver high reliability under harsh outdoor environment.
Built-in advanced multi-functions provide flexibility in constructing scalable WiFi networks for all possible applications. With two individual interfaces, each can be configured into 6 different modes with maximum of 18 combinations. With 802.11n support, EOR7550 offers bandwidth up to 300Mbps to accommodate heavy traffic services such as multimedia streaming. Establishing backbone network using 802.11a ensures stability and reduces interference while 802.11b/g offers great compatibility to all wireless clients |
| |
| |
| |
 |
|
| EOC-2610 |
Long Range Wireless Access Point / Client Bridge |
| |
| Description |
EOC-2610 is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with Super G. It features high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment. It supports distance control by 1km to 30km and RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with PoE injector for building in outdoor environment easily |
| |
| |
| |
 |
|
| EOA-7530 |
Dual Band Concurrent AP |
| |
| Description |
EOA7530 equips with two powerful independent RF interfaces which support 802.11a and 802.11b/g. With certified IP-65 protection, it is designed to deliver high reliability under harsh outdoor environment
Built-in advanced multi-functions provide flexibility in constructing scalable WiFi networks for all possible applications. With two individual interfaces, each can be configured into 3 different modes with maximum of 5 combinations. EOA7530 offers bandwidth up to 54Mbps to accommodate heavy traffic services such as multimedia streaming. Establishing backbone network using 802.11a ensures stability and reduces interference while 802.11b/g offers great compatibility to all wireless clients.
EOA7530 provides wide-range of authentication and encryption standards (including WEP, WPA, WPA2, TKIP/AES and IEEE 802.1X) to enforce maximum security. Furthermore, friendly security management user interface reduces configuration complexity. EOA7530 is a true carrier-grade product which is guaranteed to fulfill any business proposals. |
| |
| |
| |
 |
|
| EOC-1650 |
Wireless Access Point / Client Bridge / Client Router |
| |
| Description |
EOC1650 is a revolutionary product consists of conciseness, quality, and flexibility. It comes with 7dBi internal antenna and upgradable SMA interface provides a customizable interface for enhanced network coverage. Attached suction cup allows quick installation on window or smooth surface.
Operation mode provides Access Point/ Client Bridge/WDS AP / WDS Bridge / Client Router and high bandwidth up to 54Mbps. It features high transmitted output power and high receivable sensitivity. High output power and high sensitivity extends range and coverage to reduce the roaming between Access Points to ensure a stable wireless connection and reduce the expense of equipment.
It supports distance control range up to 20km and RSSI indicator which enables the best transmitted and received signals for traffic communication. User can choose a suitable antenna for flexible application. This product comes with PoE injector for building in outdoor environment easily.
To protect wireless connectivity, EOC1650 encrypt wireless transmissions through 64/128-bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the
User Isolation function can protect the private network between client users.With MSSID and VLAN support, it allows networks administrator to segregate different services or applications to different designated users, making it more scalable. |
| |
| |
| |
 |
|
| EOM-8670 |
Outdoor Mesh Access Point |
| |
| Description |
EnGenius Mesh AP is designed with IEEE802.11a/b/g standards and addressed on providing high performance mesh network. The product encased in the IP-68 protection enclosure and delivers the maximum scalability, high reliability at outdoor environment. Compared with expensive T1/E1 leased lines, the Mesh network offers a cost-effective last-mile connection.
EnGenius Mesh AP provides wireless connection over self-adaptation mesh backhaul (5GHz). The mesh AP can operate at both 2.4GHz for long range and 5GHz to reduce the frequency interference. The detachable antenna design allows users to use various antennas for different deployment.
The EOM-8670, including advanced OLSR (Optimal Link State Routing) protocol, is the industry and scalable mesh routing algorithm. It allows data to be transferred with the optimal path. WAN interface for Internet connection with Gateway mode; Power over Ethernet for both Gateway mode and Relay mode.
nGenius Mesh AP provides the highest security mechanism to protect data information over wireless. The security feature include AES backhaul link, WPA2 client access, SSL for web management. To simplify the administration task throughout the large area, this product also provides centralized management software. This software is built based on SNMP protocol and can be installed in computer. |
| |
| |
| |
 |
|
| EOA-8670 |
Outdoor Layer-2 MESH AP |
| |
| Description |
EnGenius Mesh AP is designed with IEEE802.11a/b/g standards and addressed on providing high performance mesh network. The product encased in the IP-65 protection enclosure and delivers the maximum scalability, high reliability at outdoor environment. Compared with expensive T1/E1 leased lines, the Mesh network offers a cost-effective last-mile connection.
EnGenius Mesh AP provides wireless connection over self-adaptation mesh backhaul (5GHz). The mesh AP can operate at 2.4GHz for long range interference. The detachable antenna design allows users to use various antennas for different deployment.
The EOA-8670, including advanced OLSR (Optimal Link State Routing) protocol, is the industry and scalable mesh routing algorithm. It allows data to be transferred with the optimal path. WAN interface for Internet connection with Gateway mode; Power over Ethernet for both Gateway mode and Relay mode.
EnGenius Mesh AP provides the highest security mechanism to protect data information over wireless. The security feature include AES backhaul link, WPA2 client access, SSL for web management. To simplify the administration task throughout the large area, this product also provides centralized management software. This software is built based on SNMP protocol and can be installed in computer. |
| |
| |
| |
| |
 |
|
| ENH200 |
Wireless-N Long Range Access Point/Client Bridge |
| |
| Description |
- 150Mbs, 2*10/100 Ethernet
- High Power up to 28dBm
- Integrated 10dBi Antenna with dual polarization
- Specific WSIP Mode (CR/CB/AP/WDS)
- IP55 Water proof design
- 24V PoE support
- Reset button on PoE injector
- MSSID, SNMP, Bandwidth Management
|
| |
| |
| |
 |
|
| ENH202 |
Wireless-N Long Range Access Point/Client Bridge |
| |
| Description |
- 300Mbps 2*10/100 Ethernet
- High Power up to 28dBm
- Integrated 10dBi Antenna with dual polarization
- Specific WISP Mode (CR/CB/AP/WDS)
- IP55 Water proof design
- 24V PoE support
- Reset button on PoE injector
- MSSID, SNMP, Bandwidth Management
|
| |
| |
| |
 |
|
| ENH500 |
Wireless 2x2 Long Range Outdoor Access Point/Client Bridge |
| |
| Description |
- 300Mbps, 2*10/100 Ethernet
- High Power up to 27dBm
- Integrated 13dBi Antenna with dual polarization
- Specific WSIP Mode (CR/CB/AP/WDS)
- IP55 Water proof design
- 24V PoE support
- Reset button on PoE injector
- MSSID, SNMP, Bandwidth, Management |
| |
| |
|
| |
 |
|
| EHN210/ENH210EXT |
Enterprise Gigabit Ethernet Outdoor AP/CB |
| |
| Description |
- 300Mbps, 2*Gigabit
- High Router : 29dBm
- Integrate 14dBi Antenna with dual polarization (ENH210)
- 2*N-Type connectors for 2.4GHz ANT (ENH210EXT)
- Specific WISP Mode (AP/CB/WDS)
- IP67 Water proof design
- 48V PoE support (802.3af/ at compliant)
- Reset button on PoE injector |
| |
| |
|
| |
 |
|
| EOA3630 |
Wireless Long Range Outdoor Multi-Function Access Point |
| |
| Description |
- IEEE802.11b/g compliant
- Super G, 108Mbps
- Extra N-type connector
- Water proof design (IP65)
- 7 modes support
- AP neighborhood site survery, Bandwidth shaping, Auto - Channel selection, Narrow
band support, SNMP, Private MIB, MSSID/ Vlan, PoE(24V) |
| |
| |
| |
 |
|
| EOA7530 |
Dual Radio Multi-Function Access Point / Client Bridge |
| |
| Description |
- Two Radio Support, Radio 1 :802.11a, Radio2:802.1b/g
- 2x External N-type connector for 5GHz and 2.4GHz individually
- Multi-Operation Modes for flexible and various application
- Proprietary 48V PoE
- Water proof design (IP65)
- MSSID/VLAN, Bandwidth Control and Management SNMP, WPA/WPA2,
- 802.1x Authenticator |
| |
| |
| |
 |
|
| EOA7535 |
Wireless Dual Radio Concurrent Access Point/Client Bridge |
| |
| Description |
- Two Radio Support, radio 1: 802.11a, radio2: 802.11b/g
- Water proof design(IP68). embedded lightning protector on RF and - Ethernet
- 2 x Eternal N-type connector for 5GHz and 2.4GHz individually
- Multi-Operation Modes for flexible and various application
- Proprietary 48V PoE
- MSSID/VLAN, Bandwidth Control and Management
- SNMP, WPA/WPA2, 802.1 x Authenticator |
| |
| |
|
| |
 |
|
| EOC1650 |
Wireless Outdoor Access Point/Client Bridge |
| |
| Description |
- IEEE 802.11b/g compliant
- Client Bridge/Access Point/Client Router/WDS
- Integrated 7dBi ANT & Extra SMA Connector (H/W Switch)
- Proprietary 24V PoE Design
- SNMP, 802.1x, Narrow Bandwidth support
- MSSID, VLAN
- LED Indicator
- Compact size and light weight
- Extra 5dBi Dipole antenna included |
| |
| |
|
| |
 |
|
| EOC2611P |
Wireless Outdoor Access Point/Client Bridge |
| |
| Description |
- IEEE802.11b/g compliant
- Support super G 108Mbps
- Client Bridge/Client Router/ Access Point
- Integrated 10dBi, ANT & Extra SMA connector (H/W Switch)
- Proprietary 24V PoE Design
- SNMP, Narrow Bandwidth Support.
- MSSID/VLAN
- Support Dual Antenna Polarization
- AP neighborhood site survey, Bandwidth shaping, Auto channel selection, Private MIB
- IP55 water proof design |
| |
| |
| |
 |
|
| EOC5510 |
Wireless Outdoor Access Point/Client Bridge |
| |
| Description |
- IEEE802.11a compliant
- Client Bridge/Client Router/Access Point
- Integrated 8dBi ANT@5GHz & Extra SMA connector (H/W Switch)
- Proprietary 24V PoE Design
- SNMP, Narrow Bandwidth Support
- Support Antenna Diversity
- Water proof design |
| |
| |
| |
 |
|
| EOC5611P |
Wireless Outdoor Access Point/Client Bridge |
| |
| Description |
- IEEE 802.11a/b/g compliant
- Client Bridge/Client Router/Access Point
- Integrated 14dBi ANT@5GHz & 2 x Extra SMA connector (H/W Switch)
- Propriety 24V PoE Design
- Narrow band support, SNMP
- MSSID/VLAN
- Support Dual Antenna Polarization
- AP neighborhood site survey, Bandwidth shaping, Auto channel selection, Private MIB
- IP55 water proof design |
| |
| |
| |
|