| Antenna |
Part No. |
Description |
 |
2.4GHz |
| EAD-BD05 |
Clip-On Notebook Antenna (SMA Male-reverse) |
| |
| Description |
- Increase the range of your WIFI network with the 5 dBi antenna
- Adjustable Magnetic Base
- 50 cm cable
- Connector type Male SMA reverse
- User friendly and easy installation |
| |
| |
| |
 |
2.4GHz |
| EAC-2405 |
5dBi Ceiling Antenna |
| |
| Description |
-This Ceiling or Dome Antenna is most suitable for indoor wireless deployment as the design blends well with most building’s ceiling. Suitable for ECB-3220 and SL-2611CB3 Plus Deluxe. |
| |
| |
| |
 |
2.4GHz |
| EAG-2408 |
8dBi Omni Directional Antenna |
| |
| Description |
- Long Range Wireless LAN Accessories
- 2.4GHz Antenna for Wireless LAN |
| |
| |
|
| |
 |
2.4GHz |
| EAP-2418 |
18dBi Flat Panel Antenna |
| |
| Description |
This panel antenna delivers extended access point range in a single floor environment ideally positioned in the corner of a building. It functions from point-to-point so that you can wirelessly connect LANs between the buildings in a campus-type environment. It provides multiform transmission when placed on a ceiling, as the higher powder output extends the range through typical flooring materials. |
| |
| |
|
| |
 |
2.4GHz |
| EAG-2424 |
24dBi Grid Antenna |
| |
| Description |
Square grid antenna is designed for the spread spectrum system; the dimension is in complied with the plot of feed reflector, which ensures the antenna works in the best state. This antenna features high gain, long working distance, light weight, compact structure and good command in wind resistance. |
| |
| |
| |
 |
5GHz |
| EAG-5827 |
5.8GHz / 5.4 - 5.7GHz Grid 27 dBi |
| |
| Description |
EAG-5827 Square grid antenna is designed for the spread spectrum system, the dimension is in complied with the plot of feed reflector, which ensure the antenna works in the best state. This antenna features high gain, long working distance, light weight, compact structure and good command in wind resistance. |
| |
| |
| |
 |
5GHz |
| EAP-5457-23 |
5.8GHz / 5.4 - 5.7GHz Panel Antenna 23dB |
| |
| Description |
EAP-5457-23 is most suited to be use at the customer premises site. The narrow beamwidth is well shaped to recieve wireless signal from the WISP Hot Spots AP. |
| |
| |
| |
 |
5GHz |
| EAG-5824 |
5.8GHz / 5.4 - 5.7GHz Grid 24 dBi |
| |
| Description |
EAG-5824 designed for the spread spectrum system; the dimension is in complied with the plot of feed reflector, which ensures the antenna works in the best |
| |
| |
| |
 |
5GHz |
| EAO-5812 |
5.8GHz / 5.4 - 5.7GHz Omni Antenna 12dBi |
| |
| Description |
This Omni antenna is an omni directional type that will increase signal range and strength greatly in a sphere shape. It comes with a very good fitting kit that includes high quality brackets nuts, bolts and washers. It can be used to cover 360 degree pops. |
| |
| |
| |
 |
2.4GHz |
| EAD-2407 |
7dBi Dipole Antenna (for EUB-362 EXT & ESR-1220) |
| |
| Description |
This compact 2.4GHz omni directional "rubber-duck". WiFi antenna provides broad coverage and 7 dBi gain. It is a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b and 802.11g wireless LANs, This flexible antenna features a tilt-and-swivel reverse-polarity SMA connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios that are equipped with reverse-polarity SMA connectors. Suitable for EUB-362 EXT and ESR-1220 |
| |
| |
| |
| Antenna Accessories |
Part No. |
|
 |
|
| EPE-5818af |
PoE (Can be used on 802.3af switches) |
| |
| Description |
- Delivery power over Ethernet
- cable Centralized power supply with each remote device.
- Input: 48V / 0.375A.
- Protects equipment from power surge. |
| |
| |
| |
|
|
 |
|
| EDP-5818 |
PoE Splitler |
| |
| Description |
- The EPD-5818 adopts PoE components to work as a power device. It provides PoE function to devices which have no built-in PoE function.
- By supplying 48V from Power Source Equipment to EPD-5818, it will transfer into 12V power out and transmit data rate to devices without PoE function. |
| |
| |
| |
 |
|
| EPE-4818 |
48V Power Over Ethernet |
| |
| Description |
- Transform AC power to 48V DC power.
- Inject 48V DC through CAT5 cable, pin# 4,5,7,8 into remote devices such as wireless AP, web camera, or IP phone.
- Output: 48V / 0.375A
- Follower 802.3af standard power pin definition RJ45 connector and pin out |
| |
| |
| |
 |
|
| ESA-7500 |
Surge Arrestor |
| |
| Description |
10/100 Base-T CAT5 protection.
- Convenient and integral mounting.
- 802.3af Power-over-Ethernet (PoE) Compatible
- DC spark-over voltage ：75V +-25%
- Impulse spark-over voltage ：
at 100V/us <=500V
at 1kV/us <=600V
- RoHS Compliant
- PCBA components |
| |
| |
| |
 |
|
| LP- 17 |
2-6 GHz Lightning Protector |
| |
|
| |
